Long lead that reaches from the engine to the Alfano head unit, on the steering wheel.

1 year guarantee*

Compatible with:

• All karts that use a 10mm fine or 1/8 NPT thread sizes, including most ROTAX, KF1, KF2, KF3, KGP, ICC.
• Karts that the sensor screws into the tee piece in the radiator hose.

Installation Notes:

• The sensor has a tapered thread designed to fit in 10mm fine used as standard in karts. The thread is “self sealing” and will not screw all the way in.
• Screw the sensor into its housing finger tight. Ensure the wire is not being twisted. Then tighten the sensor another 2 to 5 turns until it feels firm. Run the engine and check for a leak. If there is tighten another ½ turn.
• A little PTFE tape can also help if needed.
• DO NOT over-tighten!

Made in the UK by Kart Crazy.

* Guarantee covers the sensor ONLY. We recommend installation by a qualified person.