Short temp sensor with the standard MyChron long patch lead.
This allows the temp sensor to stay screwed into the engine when the engine is removed from the chassis.
The sensor will fit all karts that use a 10mm fine or 1/8 NPT thread sizes, this includes Rotax, X30, KF1, KF2, KF3, KGP, ICC and karts that the sensor screws into the tee piece in the radiator hose.
1 year guarantee*
Does not fit any of the MyChron 2T systems.
Made in the UK by Kart Crazy.
Installation Notes:
The sensor has a tapered thread designed to fit in 10mm fine used as standard in karts. The thread is “self sealing” and will not screw all the way in.
Screw the sensor into its housing finger tight. Ensure the wire is not being twisted. Then tighten the sensor another 2 to 5 turns until it feels firm. Run the engine and check for a leak. If there is tighten another ½ turn.
A little PTFE tape can also help if needed.
DO NOT over-tighten!
* Guarantee covers the sensor ONLY. We recommend installation by a qualified person.
