Water Temperature (Temp) Sensor MyChron 2T 4 & 5 Long Lead 7 Pin Kart Rotax X30

Patch lead compatible with the 2T MyChrons

7 pin connector

Made in the UK by Kart Crazy
Installation Notes:

• The sensor has a tapered thread designed to fit in 10mm fine used as standard in karts. The thread is “self sealing” and will not screw all the way in.
• Screw the sensor into its housing finger tight. Ensure the wire is not being twisted, then tighten the sensor another 2 to 5 turns until it feels firm. Run the engine and check for a leak. If there is tighten another ½ turn.
• A little PTFE tape can also help if needed.
• DO NOT over-tighten!

*Guarantee covers the sensor ONLY. We recommend installation by a qualified person.